Replacing a window may seem like a daunting task, but with the right tools and instructions, it can be a breeze. In this blog post, we will walk you through the steps on how to install replacement windows.
So, whether you’re replacing an old, drafty window or just want a new look for your home, follow these simple steps and you’ll be good to go!
What to Know Before Installing Replacement Windows
Replacing your own windows is a big project. It’s not something you should take on lightly.
There are a few things you should know before you start, such as what kind of replacement windows you need and what tools you’ll need to get the job done.
You also need to be aware of the potential risks involved. Installing replacement windows is a delicate process and, if not done correctly, it can result in serious injury.
So, before you begin, make sure you do your research and know exactly what you’re doing. With the right preparation, replacing your own windows can be a rewarding experience.
How Much Does It Cost to Install a Replacement Window?
The cost of installing replacement windows can vary depending on a number of factors, such as the type of window, the size of the window, and the location of the window.
For a standard-sized window, expect to pay anywhere from $100 to $400 for installation.
If you have a custom-sized window, the cost will be higher. The type of window also affects the price. For example, vinyl windows are typically less expensive than wood or aluminium windows.
The location of the window is another factor that can impact cost. If the window is located in an accessible area, such as a first-floor room, it will be less expensive to install than a window that is located in a more difficult-to-reach spot, such as an attic.
These numbers take into consideration installation costs from licensed contractors – while you might be able to get out of the whole ordeal cheaper if you do it yourself with a DIY job, keep in mind that the cost of new tools and equipment may end up being prohibitively expensive.
What Tools Do You Need to Install a Replacement Window?
Installing replacement windows is a fairly straightforward process, but it does require a few tools to get the job done.
First, you’ll need a pry bar and a screwdriver to remove the old window.
Next, you’ll need a level and a tape measure to make sure the new window is properly aligned.
Once the new window is in place, you’ll need a caulk gun to seal any gaps around the perimeter.
Finally, you’ll need a hammer and some waterproof shims to secure the window in place.
How to Install Replacement Windows
Replacing a window is a great way to improve the look and efficiency of your home. Windows are one of the most important aspects of your home’s exterior, and choosing the right replacement window can make all the difference in terms of aesthetic and energy-efficiency.
If you’re thinking about replacement windows, follow these simple steps to ensure a smooth installation process.
Measure the Area
When installing replacement windows, the first step is to measure the area where the window will be placed. This will ensure that the window is the correct size and that there is enough space for it.
Remove the Old Window
First, any storm windows should be removed. Next, the window edge should be scored with a utility knife. This will help to prevent the glass from shattering as the old window is removed.
Next, sash weights or springs should be removed, and the stops should be identified. Once the stops are located, they should be scored and removed.
Finally, any holes left behind should be filled and new pieces should be attached for stability.
Install the New Window
The first step is to clean the opening, removing any dirt, dust or debris that could interfere with the new window.
Next, apply flashing tape around the perimeter of the opening to help prevent moisture from seeping in. Then, dry fit the new window into the opening to make sure it’s the right size and that the sill is level.
Once you’ve confirmed that everything looks good, apply caulk around the edges of the window and place it in the opening. Secure the window in place with screws or nails, then check the sashes to make sure they operate smoothly.
Finally, fill any gaps around the window with caulking and trim away any excess.
Should You Choose DIY Window Replacement or Let the Pros Do It?
On the surface, DIY window replacement may seem like a cost-effective option.
However, there are several factors to consider before making a decision. If you choose to replace your windows yourself, you’ll need to invest in the necessary tools and materials. In addition, you’ll need to have a good understanding of carpentry and be comfortable working with power tools.
Most importantly, you’ll need to be able to take accurate measurements to ensure that the new windows fit properly. If even one of these factors is not executed in a precise manner, it can result in costly mistakes that could have been avoided by hiring a professional. In contrast, when you hire a window replacement company, you can rest assured that the job will be done right the first time.
Ultimately, it may make more sense – both in terms of your time and your money – to let the professionals handle this task for you. DIY window repair can be time-consuming and, if you don’t have the proper skills or equipment, incredibly frustrating. Sometimes hiring a pro to tackle the job can even save you money!
When in doubt, contact Ashton McGee Restoration Group. We have the skills and equipment necessary to repair and replace your windows – as well as to give you the tips you need to keep your windows in great shape for years to come.
So what are you waiting for? Consider us your window to the future – give Ashton McGee a call today and schedule an appointment for window repair. We got this, y’all.